aluminum strip is perfect for use on cable of equipment manufacturer.
In cable making process,Electrical coverings, also called "screens", insulate the signals that circulate in the cable from possible external interference. They also
shield the power cables to prevent them from interfering with adjacent signal circuits.
Mechanical coverings, also called "armour", protect the cable from external damage that may occur from knocks, rodents, and any other potential causes of damage..
The armour is made from steel or aluminium and can come in the form of metal strips, wires or braids.
The armour is made from steel or aluminium and can come in the form of metal strips, wires or braids.
Cables usually have an outer polymer covering for protection. This is called the "outer-sheath". This sheath protects the conductors and their insulation from external elements which may change their electrical properties, such as moisture. It
also protects them from mechanical aggresion, which may occur during the installation of the cable.
Product Description
1050 aluminum sheet/coil belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.3% of Fe is added to 1060 aluminum sheet/coil, thus, it has high electrical conductivity.
1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet/coil.
Luoyang Xinzhaohe Aluminum can manufacture and supply high quality 1050 aluminum sheet/coil with 11 years experience. Besides, different tempers are available, such as O (annealed), H12, H14, H18, etc.
Specification
|
Name |
Aluminum Sheet/Foil/Strip |
|
Grade&Temper |
1070/1060/1050/1350 O |
|
Thickness |
0.2-2.0mm |
|
Width |
20-1650mm |
|
Inner Diameter |
150/300/400/500mm |
|
Conductivity(%IACS) |
≥61.5 |
|
Reisitivity number(Ω·mm2/m) |
≤0.02825 |
|
Elongation(%) |
>23 |
|
Tensile Strength(Mpa) |
>76 |
|
Density in 20? |
2.7kg/cm3 |
Tolerance Range
|
Aluminum Alloy |
1070/1060/1050 O |
|||
|
Thickness(mm) |
0.2-0.3 |
0.4-0.8 |
1.0-2.0 |
2.0-3.0 |
|
Tolerance(mm) |
±0.015 |
±0.02 |
±0.03 |
±0.06 |
|
Width(mm) |
20-400 |
100-600 |
200-700 |
500-1600 |
|
Width Tolerance(mm) |
±0.2 |
±0.3 |
±0.3 |
±1 |
The Benefits of Aluminum
Aluminum is a light metal, about the third of the density of steel, copper, and brass.
Aluminum has good corrosion resistance to common atmospheric and marine atmospheres.
Its corrosion resistance and scratch resistance can be enhanced by anodizing.
Aluminum has high reflectivity and can be used for decorative applications.
Some aluminum alloys can match or even exceed the strength of common construction steel.
Aluminum retains its toughness at very low temperatures, without becoming brittle like carbon steels.
Aluminum is a good conductor of heat and electricity. When measured by equal cross-sectional area, electrical grade aluminum has conductivity which is approximately 62%
of electrical grade annealed copper. However, when compared using equal weight, the conductivity of aluminum is 204% of copper.Aluminum is readily worked and formed using a wide variety of forming processes
including deep- drawing and roll forming.
Aluminum is non-toxic and is commonly used in contact with foodstuffs.
Aluminum can be readily recycled.
