Leon@xzhaluminum.com
Why Choose Aluminum for transformer?
Economic ,means less cost for better achievements
Conductivity of Copper is better,but Aluminum's is as double as copper at the same price.
Aluminum is more flexible that means it easier to wind and place in winding process.
Aluminum is lighter,easy to place.
In North America ,aluminum is the moost popular choice of winding material for low
-voltage,dry-type transformers.
Why Choose us?
We have been more than 11 years experience of aluminum foil ,aluminum strip for transformer, We understand deeply what our client needs,strictly in accordance with international standards such as ASTM,EN_AB,JIS,GB for the production of various grades of aluminum products.
We make sure each piece of aluminum Roll No Burrs,No Scratches of Round Edge to fit for transformer winding.
Any size Order! No Matter what your order size is ,large or trial , we all accepted, Our modern supply managment system can make sure raw material is really just in time.
1060 aluminium alloy
1060 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). It is fundamentally very similar to 1050 aluminium alloy, with the difference coming down to 0.1% aluminium by weight. However, while both 1050 and 1060 are covered by the same ISO standard, they are covered by different ASTM standards.
As a wrought alloy, it is typically formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.
Alternate designations include Al99.6 and A91060. It is described in the following standards:
ASTM B 209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B 210: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B 211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B 483: Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
Chemical Composition
The alloy composition of 1060 aluminium is
Aluminium: 99.6% min
Copper: 0.05% max
Iron: 0.35% max
Magnesium: 0.03% max
Manganese: 0.03% max
Silicon: 0.25% max
Titanium: 0.03% max
Vanadium: 0.05% max
Specification
|
Name |
Aluminum Sheet/Foil/Strip |
|
Grade&Temper |
1070/1060/1050/1350 O |
|
Thickness |
0.2-2.0mm |
|
Width |
20-1650mm |
|
Inner Diameter |
150/300/400/500mm |
|
Conductivity(%IACS) |
≥61.5 |
|
Reisitivity number(Ω·mm2/m) |
≤0.02825 |
|
Elongation(%) |
>23 |
|
Tensile Strength(Mpa) |
>76 |
|
Density in 20? |
2.7kg/cm3 |
Tolerance Range
|
Aluminum Alloy |
1070/1060/1050 O |
|||
|
Thickness(mm) |
0.2-0.3 |
0.4-0.8 |
1.0-2.0 |
2.0-3.0 |
|
Tolerance(mm) |
±0.015 |
±0.02 |
±0.03 |
±0.06 |
|
Width(mm) |
20-400 |
100-600 |
200-700 |
500-1600 |
|
Width Tolerance(mm) |
±0.2 |
±0.3 |
±0.3 |
±1 |
